no way to compare when less than two revisions

Rozdíly

Zde můžete vidět rozdíly mezi vybranou verzí a aktuální verzí dané stránky.

@@ Řádek 1: / Řádek 1: @@
+===== Inputs and Outputs =====
+----
+Submenu Inputs and Outputs enables setting up the inputs and switching on the outputs (controlling own consumption - using surplus energy)\\
+\\
+{{  .:vstupy_a_vystupy.png?nolink&  }}
+==== Setting up the Inputs ====
+**Permit Input 3** \\
+Use DI 3 input if you wish to display power from the electrometer. If you want to connect another device to this input, tick the box.
+The table contains current inputs status. Set up the values.
+==== Setting up the Outputs ====
+**Permit Output Module** \\
+Tick, if there is an output module connected.\\
+\\
+**Delay for Switching on the Outputs** \\
+Set up the delay from reaching switch on conditions until it is really switched on. The delay prevents switching on for short time only, when switch on condition fluctuates about the limit value.
+==== Switching on the Outputs ====
+You can name the inputs and set up what will switch them on and on what conditions. The table contains current status too.