en:sim:manual:prvni_spusteni:vyhledani_jednotky_v_siti_a_pripojeni
no way to compare when less than two revisions
Rozdíly
Zde můžete vidět rozdíly mezi vybranou verzí a aktuální verzí dané stránky.
Předchozí verzeNásledující verze | |||
— | en:sim:manual:prvni_spusteni:vyhledani_jednotky_v_siti_a_pripojeni [2013/12/02 19:17] – jitka | ||
---|---|---|---|
Řádek 1: | Řádek 1: | ||
+ | ===== How to find and connect unit in the LAN ===== | ||
+ | |||
+ | |||
+ | ---- | ||
+ | |||
+ | |||
+ | \\ | ||
+ | When you have switched on the power supply a green LED diode indicating status lights up. At the same time a green diode at the net connector lights up and an orange diode starts flashing . | ||
+ | |||
+ | |||
+ | ==== Getting IP address ==== | ||
+ | |||
+ | |||
+ | \\ | ||
+ | With nets TCP/IP (most common ones currently) every item needs its setting: | ||
+ | |||
+ | |||
+ | * **IP address** | ||
+ | * **Network mask** | ||
+ | * **Default gateway** | ||
+ | * **DNS servers** | ||
+ | Once you have connected | ||
+ | |||
+ | |||
+ | * If you want to connect Solar Monitor unit to the company network, consult the network administrator fist. | ||
+ | * If you want to connect Solar Monitor unit to your domestic network, it is very likely that there is a DHCP server which assigns the newly connected devices correct setting automatically. | ||
+ | * If you want to connect Solar Monitor unit to the PC directly, see the chapter bellow: Connecting to the PC directly. | ||
+ | |||
+ | |||
+ | <WRAP info> For initial connection with the unit we only to need set up the IP address and Network mask correctly. It means that your PC and the unit are in the same network. The same network = different IP address (e.g. 192.168.1.99 and 192.168.1.98) | ||
+ | |||
+ | |||
+ | If there is no DHCP server in your network, connect the unit to the power supply and when the green LED diode Status lights up, press button | ||
+ | |||
+ | |||
+ | To find the unit in the net there is application Etool available (download here[[http:// | ||
+ | | ||
+ | {{ : | ||
+ | | ||
+ | V seznamu se objeví všechna zařízení od společnosti Solar Monitor s. r. o. připojená k místní síti. Nově nalezená zařízení jsou v seznamu zvýrazněna modrou barvou. <WRAP info> V případě, že má jednotka Solar Monitor povolen režim DHCP klient (ve výchozím stavu ano!), objeví se v seznamu až po vypršení prodlevy pro odezvu DHCP serveru, tedy přibližně po 60 vteřinách od připojení do sítě nebo zapnutí. </ | ||
+ | Tlačítko {{: | ||
+ | |||
+ | |||
+ | ==== Připojení přímo k PC ==== | ||
+ | |||
+ | |||
+ | Pokud máte jednotku přímo připojenou k počítači / notebooku, tak není možno kontaktovat DHCP server a jednotka tedy po vypršení 60 sekund nastaví tyto tovární hodnoty: \\ \\ Tabulka výchozích hodnot nastavení síťě (IP konfigurace) v Solar Monitoru | ||
+ | |||
+ | |||
+ | ^ Parametr | ||
+ | | IP adresa | ||
+ | | Maska sítě | ||
+ | | Výchozí brána (default gateway) | ||
+ | | DNS1, DNS2 | 0.0.0.0, 0.0.0.0 | ||
+ | |||
+ | |||
+ | | ||
+ | |||
+ | |||
+ | ^ Parametr | ||
+ | | IP adresa | ||
+ | | Maska sítě | ||
+ | | Výchozí brána (default gateway) | ||
+ | | DNS1, DNS2 | 0.0.0.0, 0.0.0.0 | ||
+ | |||
+ | |||
+ | Pro umožnění komunikace s jednotkou Solar Monitor proto přenastavte IP adresu Vašeho počítače na 192.168.1.98 a masku sítě na 255.255.255.0. Tato nastavení jsou přístupná v ovládacích panelech. | ||
+ | |||
+ | |||
+ | | ||
+ | |||
+ | |||
+ | ^ Parametr | ||
+ | | IP adresa | ||
+ | | Maska sítě | ||
+ | | Výchozí brána (default gateway) | ||
+ | | DNS1, DNS2 | 0.0.0.0, 0.0.0.0 | ||
+ | |||
+ | |||
+ | \\ | ||
en/sim/manual/prvni_spusteni/vyhledani_jednotky_v_siti_a_pripojeni.txt · Poslední úprava: 2020/01/15 10:09 autor: ondra