Uživatelské nástroje

Nástroje pro tento web


en:sim:manual:prvni_spusteni:vyhledani_jednotky_v_siti_a_pripojeni
no way to compare when less than two revisions

Rozdíly

Zde můžete vidět rozdíly mezi vybranou verzí a aktuální verzí dané stránky.


Předchozí verze
Následující verze
en:sim:manual:prvni_spusteni:vyhledani_jednotky_v_siti_a_pripojeni [2014/08/28 10:59] jitka
Řádek 1: Řádek 1:
 +===== How to Find and Connect Unit in the LAN =====
 +
 +
 +----
 +
 +
 +\\ 
 +When you have switched on the power supply a green LED diode indicating status starts glowing. At the same time a green diode at the net connector starts glowing and an orange diode starts flashing .
 +
 +
 +In default setting the unit has DHCP client regime granted. DHCP server (if there is one in the local network) assigns IP address automatically.
 +
 +
 +If there is no DHCP server in your network, connect the unit to the power supply and when the green LED diode Status lights up, press button Setup three times.\\ 
 +In few seconds you will be able to connect to fixed IP address [[http://192.168.1.99|192.168.1.99]].\\ 
 +\\ 
 +When you enter this IP address in your web browser, you get into unit's web interface.\\ 
 +To find the unit in the net there is application **ETool** available.\\ 
 +This application is able to find your unit without the IP address settings. Application can be downloaded [[http://www.solarmonitor.cz/podpora/ke-stazeni/utililty|here]] and installed in your PC later on.\\ 
 +\\ 
 +**ETool** \\ 
 +\\ 
 +ETool helps to detect your device on the net, configure it, change default setting or restart the device.\\ 
 +\\ 
 +This utility is to be installed in PC with Windows system. It is essential to allow sending broadcast packets through the Windows firewall.\\ 
 +\\ 
 +{{  :en:sim:manual:prvni_spusteni:etool.png?nolink&  }}\\ 
 +\\ 
 +The list shows all Solar Monitor devices connected to the local network. Newly detected devices are highlighted in blue colour.\\ 
 +\\ 
 +When you have selected a device in the list, it is possible to edit its setting and reset default set up.\\ 
 +\\ 
 +Button {{:en:sim:manual:prvni_spusteni:etool_tlacitko.png?nolink&}}next to box “IP address“ opens the pages of the selected unit. See chapter [[:en:sim:manual:prvni_spusteni:zobrazeni_weboveho_rozhrani|Web interface]].\\ 
 +You can also open unit's sites when you click on Device image (left down).
  
en/sim/manual/prvni_spusteni/vyhledani_jednotky_v_siti_a_pripojeni.txt · Poslední úprava: 2020/01/15 10:09 autor: ondra