User Tools

Site Tools

This translation is older than the original page and might be outdated. See what has changed.

en:sim:manual:rychly_navod:konfigurace:nastaveni_pulzu

This is an old revision of the document!


How to Setup Reading Pulses from the Electro Meter


In case there is no electro meter connected to your Solar Monitor, go to Next >>





In SM2-MU web interface go to menu System setup/Inverters & Meters



In Energy measuring setup select reading energy from the electro meter and set up the right number of pulses per 1 kWh.






Enter PV plant's installed output and production eletro meter's status.



Default setting is reading 1000 pulses per 1 kWh. If your electro meter shows a different number, change the setting. If it is 1000 pulses, go to Next >>.


The number of impulses per 1 kWh is usually between 250-1000 imp/1kWh. In case there are 2 possible numbers of impulses at your electro meter, the lower number is usually the right one for the SO output.
The higher number tells you how often a LED diode at your electro meter switches on.


Follow instruction bellow in order to setup a number of pulses different than 1000 per 1 kWh:

1. Direct measuring

In the electro meter's label or documentation find out how many pulses per 1 kWh your electro meter generates at the SO output. Fill in this value into relevant box in SM2-MU menu Inverters and measuring.

2. Indirect measuring

In the electro meter's label or documentation find out how many pulses per 1 kWh your electro meter generates at the SO output. Use this number in calculation, see example bellow.

Example: Electro meter's label states 10 000 impulses per 1 kWh.

Look at the indirect power measuring transformer (1 transformer connected to each phase) and find a ratio (e.g. 150A/5A). Use the result of this ratio (30 in this example) in the formula (10 000/30). Fill in the whole formula (i.e. 10000/30) into relevant box in SM2-MU menu Inverters and measuring.







When you have changed the setup, remember to save the changes .

en/sim/manual/rychly_navod/konfigurace/nastaveni_pulzu.1408433950.txt.gz · Last modified: 2014/08/19 09:39 by ondra