User Tools

Site Tools


en:sim:manual:rychly_navod:konfigurace:nastaveni_pulzu

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

en:sim:manual:rychly_navod:konfigurace:nastaveni_pulzu [2018/06/27 12:45]
ondra
en:sim:manual:rychly_navod:konfigurace:nastaveni_pulzu [2019/03/11 14:50] (current)
ondra
Line 1: Line 1:
-===== How to Setup Reading Pulses from the Electrometer ​=====+===== Step 4 - Counter Settings ​=====
  
  
Line 5: Line 5:
  
  
-In case there is no electro meter connected to your Solar Monitor, go to [[.:konfigurace_stridacu|Next >>​]]\\ ​+If there is no counter ​connected to your Solar Monitor ​(electrometer,​ gas meter, inverter, tracker, batery or another meter), go to [[:en:​sim:​manual:​rychly_navod:​konfigurace:​emaily_sms|Next >>​]]\\ ​
 \\  \\ 
-<WRAP half column>\\ +{{  :​en:​sim:​manual:​rychly_navod:​konfigurace:​krok4.png?​direct& ​ }}\\  
 +First you need to allow the chosen input, then you will be able to set it up.\\  
 +{{  :​en:​sim:​manual:​rychly_navod:​konfigurace:​krok4a.png?​direct& ​ }}\\  
 +Select particular counter.\\  
 +{{  :​en:​sim:​manual:​rychly_navod:​konfigurace:​krok4b.png?​direct& ​ }}\\ 
 \\  \\ 
-\\  +<WRAP info> 
-\\ +For details about this settings see chapter [[..:​..:​menu_nastaveni:​vstupy_a_vystupy|Inputs & Counters]]. 
-\\ +
-In SM2-MU web interface go to menu Settings/Inputs & Counters+
 </​WRAP>​ </​WRAP>​
-<WRAP half column>​ +Click on Next on the right to get to the next step. <​WRAP ​right[[:​en:​sim:​manual:​rychly_navod:​konfigurace:emaily_sms|Next >>]] </​WRAP>​ <​WRAP ​left> [[:en:sim:manual:rychly_navod:konfigurace:detekce_senzoru|<< Back]] </​WRAP>​
-{{  ​..:​jak_na_to:​stridace_a_mereni.png?​100 ​ }} +
-</WRAP> +
-\\ +
-V tabulce Vstupy a čítače vyberte u toho vstupu, do kterého máte připojené měřidlo, funkci Čítač. +
-Pozn.: Měřidlo může být připojeno do každého ze tří vstupů. Do SM2-MU tak můžete připojit až 3 měřidla. \\ +
-{{ :​en:​sim:​manual:​rychly_navod:​jak_na_to:vstupy_a_citace.png?​direct |}} \\ \\ +
- +
-<WRAP half column>​\\  +
-In Energy measuring setup select reading energy from the electro meter and set up the right number of pulses per 1 kWh.\\  +
-</​WRAP>​ <WRAP half column> {{  ..:​jak_na_to:​pulzy.png?​200 ​ }}\\  +
-</​WRAP>​\\  +
-\\  +
-<WRAP half column>​\\  +
-\\  +
-Enter PV plant'​s installed output and production eletro meter'​s status. +
-</​WRAP>​ +
-<WRAP half column>​ +
-{{  ..:​jak_na_to:​vykon_a_korekce.png?​200 ​ }} +
-\\  +
-</​WRAP>​\\  +
-<WRAP info> Default setting is reading 1000 pulses per 1 kWh. If your electro meter shows a different number, change the setting. If it is 1000 pulses, go to [[.:​konfigurace_stridacu|Next >>]]</​WRAP>​ <​WRAP ​half column> +
-</​WRAP>​ +
-<WRAP half column>​ +
-\\  +
-The number of impulses per 1 kWh is usually between 250-1000 imp/1kWh. In case there are 2 possible numbers of impulses at your electro meter, the lower number is usually the right one for the SO output.\\  +
-The higher number tells you how often a LED diode at your electro meter switches on. +
-</​WRAP>​ +
-<WRAP half column>​ +
-{{ .:​obrazek_elmeru.png?&​100 |}} +
-\\ \\ +
-</​WRAP>​ +
-**Follow ​ instruction bellow in order to setup a number of pulses different than 1000 per 1 kWh:**  +
-==== 1. Direct measuring ==== +
- +
- +
-In the electro meter'​s label or documentation find out how many pulses per 1 kWh  your electro meter generates at the SO output. Fill in this value into relevant box in SM2-MU menu [[..:..:menu_nastaveni:stridace_a_mereni|Inverters and measuring]].\\  +
-==== 2. Indirect measuring ==== +
- +
- +
-In the electro meter'​s label or documentation find out how many pulses per 1 kWh  your electro meter generates at the SO output. Use this number in calculation,​ see example bellow.\\  +
-\\  +
-__ExampleElectro meter'​s label states 10 000 impulses per 1 kWh.__ \\  +
-\\  +
-<WRAP half column> Look at the indirect power measuring transformer (1 transformer connected to each phase) and find a ratio (e.g. 150A/5A). Use the result of this ratio (30 in this example) in the formula (10 000/30). Fill in the whole formula (i.e. 10000/30) into relevant box in SM2-MU menu [[..:..:​menu_nastaveni:​stridace_a_mereni|Inverters and measuring]].\\  +
-\\  +
-</​WRAP>​ <WRAP half column>​\\  +
-{{  ..:​jak_na_to:​impulsy_neprime_mereni.png?​200 ​ }} </​WRAP>​ +
- +
- +
-<WRAP half column>​\\  +
-\\  +
-\\  +
-\\  +
-\\  +
-When you have changed the setup, remember to save  the changes {{..:​jak_na_to:​tlacitko_ulozit.png?​nolink&​}}. </​WRAP>​ <WRAP half column> {{  ..:​jak_na_to:​ul_zmeny_strid_a_mereni.png?​100 ​ }}</​WRAP>​ +
- +
- +
-<WRAP right> [[.:​konfigurace_stridacu|Next >>]] </​WRAP>​ +
-<WRAP left> [[.:nazev_jednotky|<< Back]] </​WRAP>​+
  
en/sim/manual/rychly_navod/konfigurace/nastaveni_pulzu.1530096341.txt.gz · Last modified: 2018/06/27 12:45 by ondra