no way to compare when less than two revisions

Rozdíly

Zde můžete vidět rozdíly mezi vybranou verzí a aktuální verzí dané stránky.

@@ Řádek 1: / Řádek 1: @@
+===== Mechanical Fastening =====
+----
+Solar Monitor unit is designed for indoor installation. When placed outdoor it needs sufficient protection from external influences and respecting operational temperature range is essential. You will find the data in the chapter [[:sim:manual:popis:parametry_zakladniho_modulu|Parameters of basic module]].
+==== Installation on  DIN Rail ====
+\\
+<WRAP half column>\\
+\\
+\\
+\\
+\\
+Click the module shut on the DIN rail using orange hitches. </WRAP> <WRAP half column> {{  :en:sim:rm:rychly_navod:jak_na_to:montaz_na_din.png?nolink&250  }}\\
+\\
+</WRAP>\\
+\\
+\\
+\\
+<WRAP half column>\\
+\\
+\\
+Fasten the power supply in similar way </WRAP> <WRAP half column> {{  :en:sim:rm:rychly_navod:jak_na_to:rm_din_montaz_zdroj.png?nolink&250  }}\\
+\\
+</WRAP>\\
+\\
+\\
+==== Istallation on the Wall ====
+<WRAP half column> Use holes in the orange hitches to install the module on the
+wall
+. The hitches must be “opened”. To open the hitches press the safety catch with a pointed object (e.g. pen) first and then open the hitch. The same for the second hitch. Insert a screw into the holes and fasten the unit on the
+wall
+. </WRAP> <WRAP half column> {{  :en:sim:rm:rychly_navod:jak_na_to:montaz_na_zed.png?nolink&280  }}\\
+\\
+</WRAP>