no way to compare when less than two revisions

Rozdíly

Zde můžete vidět rozdíly mezi vybranou verzí a aktuální verzí dané stránky.

@@ Řádek 1: / Řádek 1: @@
+===== How to Find and Connect Unit in the LAN =====
+----
+\\
+When you have switched on the power supply a green LED diode indicating status starts glowing. At the same time a green diode at the net connector starts glowing and an orange diode starts flashing.
+In default setting the unit has DHCP client regime granted. DHCP server (if there is one in the local network) assigns IP address automatically.
+If there is no DHCP server in your network, the device attempts to get the IP address for 20 sec. After that it is possible to connect to IP address [[http://192.168.1.99|192.168.1.99]].\\
+When you enter this IP address into your web browser, your unit's web interface is displayed.\\
+\\
+**ETool** application makes finding unit in the net easier.
+\\
+This application is able to find your unit without the IP address settings. Application can be downloaded [[http://www.solarmonitor.cz/podpora/ke-stazeni/utililty|here]] and installed in your PC later on.\\
+\\
+**ETool** \\
+ETool helps to detect your device on the net, configure it, change default setting or restart the device.
+This utility is to be installed in PC with Windows system. It is essential to allow sending broadcast packets through the Windows firewall.
+\\
+{{  :en:sim:rm:prvni_spusteni:etool_sm2-rm.png?nolink&  }}\\
+\\
+All Solar Monitor devices connected to LAN appear in the list. Devices found for the first time are highlighted in blue color.
+\\
+After you have selected a particular device in the list, you will be able to change its setting, including default setting.\\
+\\
+Button {{:en:sim:rm:prvni_spusteni:etool_tlacitko.png?nolink&}}next to the box “IP address“ opens particular unit's site. See chapter [[:en:sim:rm:prvni_spusteni:webove_rozhrani|Web interface]].\\
+Unit's website can also be opened when you click on Device image left down.