User Tools

Site Tools

This translation is older than the original page and might be outdated. See what has changed.

en:sim:rm:rychly_navod:jak_na_to:vyhledani_v_siti

This is an old revision of the document!


6. Detecting Unit in the Network, Interface Display



SM2-RM unit has DHCP client regime allowed in its default setting- IP address is allocated automatically from DHCP server in local network (if available).

If there is no DHCP server in your network, the device attempts to get the IP address for 20 seconds, after that it is possible to connect to the IP address 192.168.1.99.
When you enter this IP address in your web browser, you will get the unit's web interface.

ETool utility makes detecting SM2-RM unit in the network easier.

This application detects your unit with any IP address. You can download the application here and install in your PC.



Button next to “IP address“ box opens particular unit's site. See chapter Web interface.
Another way how to open unit's site is to click on Device Image down left.

en/sim/rm/rychly_navod/jak_na_to/vyhledani_v_siti.1409226861.txt.gz · Last modified: 2014/08/28 13:54 by ondra