no way to compare when less than two revisions

Rozdíly

Zde můžete vidět rozdíly mezi vybranou verzí a aktuální verzí dané stránky.

@@ Řádek 1: / Řádek 1: @@
+===== Network and Time Submenu =====
+----
+This submenu enables setting the network, time and communication with subordinate [[:en:sim:portal:overview:list|Portal]].\\
+\\
+{{  :en:sim:rm:web_zarizeni:sit_a_cas.png?nolink&  }}
+==== Network Setup ====
+**IP Address** \\
+Enter the IP address out of the range of network that Solar Monitor uses.\\
+\\
+**Network Mask** \\
+Enter the network mask corresponding to the Solar Monitor's network.\\
+\\
+**Default Gateway** \\
+Enter the local net address of a device that serves as default gateway to other nets. In local nets it is mostly ADSL modem or some kind of a router (e.g. WiFi router). Without the default gateway the unit won't have the internet access (functions Internet Time and Sending to the [[:en:sim:portal:overview:list|Portal]] won't work).\\
+\\
+**Primary DNS, Secondary DNS** \\
+These are servers responsible for translating domain names to IP addresses. Without them the unit isn't likely to have the access to the internet. Your network administrator or provider should inform you about the correct setting.\\
+\\
+**HTTP Port** \\
+Default setting: 80. You can change the port where the Solar Monitor unit accepts web interface clients. If you set up another port, you have to enter it in the Address box in your browser (e.g. 192.168.1.99:81).\\
+\\
+**DHCP Client** \\
+DHCP client regime enables the unit to get an entire IP configuration (i.e. IP address, network mask, default gateway, primary DNS, secondary DNS) from a DHCP server of the particular network, in case you have got that server, of course. DHCP server function is integrated in most current ADSL modems and WiFi routers, and local networks can usually use that function.
+If your unit “disappears” in the network after you have switched on DHCP client, you can find it with ETool utility, which can be downloaded [[http://www.solarmonitor.cz/podpora/ke-stazeni/utililty|here.]]
+==== Sending Data to the Portal ====
+**Sending Permitted** \\
+You can permit this option once you have access to the [[:en:sim:portal:overview:list|Portal]]. The unit will start sending data to the [[:en:sim:portal:overview:list|Portal]] in preset interval.\\
+\\
+**Portal Address** \\
+Enter the IP address or [[:en:sim:portal:overview:list|Portal]]'s name that Solar Monitor unit should connect to (e.g. portal.solarmonitor.cz).\\
+\\
+**Service Path** \\
+Enter exact location of SOAP service, that accepts data at the [[:en:sim:portal:overview:list|Portal]]. Provider or portal administrator will provide this info.\\
+\\
+**Remote Port** \\
+Enter the port that communicates with SOAP service at the [[:en:sim:portal:overview:list|Portal.]]\\
+\\
+**Sending Period** \\
+Set the time period of sending data to the [[:en:sim:portal:overview:list|Portal]].
+==== Portal Communication Test ====
+When you press this button, a trial message is sent to the portal and you can check the status of delivery. Inverters are not included in testing packet.
+==== Internet Time ====
+**SNTP Server** \\
+Enter time server address on the internet. Default: time.nist.gov.\\
+\\
+**Time Zone** \\
+Select your time zone.
+==== Date and Time ====
+**Current Date** \\
+Set/check the right date. This item is updated automatically from the SNTP server on the internet.\\
+\\
+**Current Time** \\
+Set/check the right time. This item is updated automatically from the SNTP server on the internet. Button “Update now” synchronizes the time with the server.