en:sim:manual:rychly_navod:jak_na_to

Connecting Digital Inputs

Anonymous (anonymous@undisclosed.example.com) — 2018-07-10T14:08:46+00:00

Connecting Digital Inputs ---------- If you don't intend to connect any inputs to your Solar Monitor, go to Next >> Solar Monitor has 3 digital inputs DI available. If DI input doesn't read the energy from the electro meter, it can be used as a standard digital input.

Connecting Digital Outputs

Anonymous (anonymous@undisclosed.example.com) — 2014-08-26T09:35:53+00:00

Connecting Digital Outputs ---------- In SM2-MU there is a relay available. The relay can either switch on the ventilation on the basis of current temperature, or it can switch on/off the boiler (via contractor) on the basis of current production of your PV plant.

Connecting to the Electro Meter

Anonymous (anonymous@undisclosed.example.com) — 2018-07-10T14:07:39+00:00

Connecting to the Electro Meter ---------- If there is no electro meter connected to your SM2-MU , go to Next >> Solar Monitor is connected to the electro meter with its S0 (puls) output as shown in the following picture: You can use any of 3 digital DI inputs to count energy from the meter.

Basic Module SM2-MU

Anonymous (anonymous@undisclosed.example.com) — 2014-08-26T09:19:15+00:00

Basic Module SM2-MU ---------- SM2-MU unit has been designed for indoor usage. When used outdoor, it requires sufficient protection from external impacts and the range of operational temperatures must be respected. The values concerned to be found in chapter

Connecting the Power Supply

Anonymous (anonymous@undisclosed.example.com) — 2014-08-26T09:37:39+00:00

Connecting the Power Supply ---------- Connect the power supply (9-35V) to SM2-MU unit as shown in the following pictures. The Power Supply at the DIN Rail Adaptor into the Socket Configuration procedure to be found here. << Back

Connecting the Sensors

Anonymous (anonymous@undisclosed.example.com) — 2019-08-19T12:44:21+00:00

Connecting the Sensors ---------- If there are no sensors connected to your SM2-MU device, go to Next >> Connect the sensors to the SM2-MU according to the following pictures: Irradiation Sensor In this picture you see to which terminal on the SM2-MU connects each pin of the irradiance sensor.

Solar Monitor Installation Guide

Anonymous (anonymous@undisclosed.example.com) — 2019-09-02T13:39:19+00:00

Solar Monitor Installation Guide * Basic Module * Sensors * Examples of sensor connection diagrams * Example 1 * Example 2 * Example 3 * Inverters * Electrometer * LAN * Digital Inputs * Digital Outputs * Power Supply * Contents * Frequently Asked Questions

LAN

Anonymous (anonymous@undisclosed.example.com) — 2014-09-11T13:15:12+00:00

LAN ---------- Connect the unit into LAN (to the switch, PC) with a straight or cross-over UTP cable. Connect the UTP cable into RJ45 terminal of SM2-MU. The device is connected if a green light „LINK“ at the RJ45 terminal is on.

Connecting the Inverters

Anonymous (anonymous@undisclosed.example.com) — 2019-09-30T11:53:50+00:00

Connecting the Inverters ---------- If there are no inverters connected to your SM2-MU device, go to Next >> We use the following types of SMU-MU terminals according to the inverter's manufacturer: A, B, SGND, Z, Y. For more detailed description of connecting particular type of inverters to SM2-MU, go