Rozdíly

Zde můžete vidět rozdíly mezi vybranou verzí a aktuální verzí dané stránky.

--- en:sim:manual:rozsirujici_moduly:sm2_di [2014/08/11 18:10] – jitka
+++ en:sim:manual:rozsirujici_moduly:sm2_di [2018/06/25 13:40] – ondra
@@ Řádek 5: / Řádek 5: @@
 DI module increases the number of unit's digital inputs significantly and enables connecting other devices.\\
-\\
-{{  :en:sim:manual:rozsirujici_moduly:moduly_vykres.png?nolink&  }}\\
-\\
-\\
-\\
-**Technical specification** \\
-^Binary inputs |  2 x 5 inputs with standard Vcc and GND |
-^  ^  |
-|  |  |
-^Terminals |  max diameter 1,5 mm? |
-^  ^  |
-|  |  |
-^Connectivity |  HBUS |
-^  ^  |
-|  |  |
-^Dimensions |  36 x 89,7 x 62,2 mm |
-^  ^  |
-|  |  |
-^Installation |  DIN rail |
-^  ^  |
-|  |  |
-^Power supply |  12 – 24 V DC, max 100 mA |
-^  ^  |
-|  |  |
-^Temperature range |  -25 °C to +60 °C |
-\\
 \\
 **Connecting digital inputs** \\
@@ Řádek 43: / Řádek 15: @@
 The first one requires connecting terminal DC- to SM2-MU with relevant terminal DCOM at the module SM2-DI. One terminal DCOM goes with inputs DI1–DI5 and the second terminal with inputs DI6–DI10. In order to start the input, signal DC+ from SM2-MU unit has to be connected to relevant terminal of SM2-DI terminal.\\
 \\
-{{  :en:sim:manual:rozsirujici_moduly:di-zapojeni_1.png?nolink&  }}\\
+{{  .:di-zapojeni_1.png?nolink&  }}\\
 \\
 For the second type of wiring, where inputs of SM2-DI module use external power supply (see the following picture), voltage has to be in the range of 8-80 V.\\
 \\
-{{  :en:sim:manual:rozsirujici_moduly:di-zapojeni2.png?nolink&  }}\\
+{{  .:di-zapojeni2.png?nolink&  }}\\
 \\
 **Start and configuration** \\
@@ Řádek 54: / Řádek 26: @@
-Open menu “System set up/ Inputs and Outputs” in your browser.
+Open menu “Settings / Inputs & Counters” in your browser.
 Select limit values for relevant connected inputs.\\
 \\
-{{  :en:sim:manual:rozsirujici_moduly:di-nastaveni_vstupu.png?nolink&  }}\\
+{{  .:di-nastaveni_vstupu.png?nolink&  }}\\
-Tick the box to choose the type of message (e-mail, SMS) that informs the user of changes in input values.\\
+It is possible to choose the type of message (e-mail, SMS) that informs the user of changes in input values.\\
 \\
-{{  :en:sim:manual:rozsirujici_moduly:di-sms.png?nolink&  }}
+==== Technical specification ====
+<WRAP half column>
+^Binary inputs |  2 x 5 inputs with standard Vcc and GND |
-\\
+^  ^  |
+|  |  |
+^Terminals |  max diameter 1.5 mm? |
+^  ^  |
+|  |  |
+^Connectivity |  HBUS |
+^  ^  |
+|  |  |
+^Dimensions |  35.6 x 89.7 x 62.2 mm |
+^  ^  |
+|  |  |
+^Installation |  DIN rail |
+^  ^  |
+|  |  |
+^Power supply |  12 – 24 V DC, max 100 mA |
+^  ^  |
+|  |  |
+^Degree of protection |  IP20 |
+^  ^  |
+|  |  |
+^Temperature range |  -25 °C to +60 °C |
+</WRAP>
+<WRAP half column>
+{{  .:moduly_vykres.png?nolink&  }}\\
+</WRAP>