Rozdíly

Zde můžete vidět rozdíly mezi vybranou verzí a aktuální verzí dané stránky.

--- en:sim:manual:rozsirujici_moduly:sm2_gsm [2016/10/04 14:15] – ondra
+++ en:sim:manual:rozsirujici_moduly:sm2_gsm [2017/08/10 10:00] – ondra
@@ Řádek 6: / Řádek 6: @@
 You can receive text messages informing you of your PV plant via GSM modem. This way you notice every outage and alarm. GSM modem enables GPRS communication too, or telephone calls. Functions of GSM modem can be used in other applications as well.\\
-\\
-{{  .:gsm_vykres.png?nolink&  }}\\
-\\
-\\
-\\
-**Technical Specification**
-^Serial |  SMA connector |
-^  ^  |
-|  |  |
-^Terminals |  max diameter 1.5 mm? |
-^  ^  |
-|  |  |
-^Connectivity |  HBUS, RS232 |
-^  ^  |
-|  |  |
-^Dimension |  53,6 x 89.7 x 62.2 mm |
-^  ^  |
-|  |  |
-^Installation |  DIN rail |
-^  ^  |
-|  |  |
-^Power supply |  12 – 24 V DC, max 1 A |
-^  ^  |
-|  |  |
-^Temperature range |  -25 °C to +60 °C |
-\\
 \\
 **Connecting Aerial and Inserting SIM Card** \\
@@ Řádek 55: / Řádek 25: @@
 \\
 {{  .:gsm-sms.png?nolink&  }}
+==== Specification ====
+^RF parameters ^  |
+|Quad-band  |  850/900/1800/1900MHz |
+|GPRS Multi-slot Class  |  12, 1~12 configurable |
+|Compliant to GSM Phase 2/2+  |  Class 4|
+|  |  (2W @ 850/ 900 MHz)|
+|  |  Class 1|
+|  |  (1W @ 1800/1900MHz)|
+|Certificates  |  CE, FCC, GCF, ICASA, PTCRB, TELCEL, IC, NCC, UCRF, Rogers, ANETEL |
+^  ^  |
+|  |  |
+^Aerial ^  |
+|Connector  |  SMA (male) |
+^  ^  ^
+|  |  |
+^Interface ^  |
+|RS232  |  HBUS (DIN rail, bottom pluggable, no external wires needed) and RJ12 connector<sup>1</sup> |
+|Max. distance  |  12 m|
+^  ^  |
+|  |  |
+^Electrical parameters ^  ^
+|Power supply  |  9-35 V DC, typ. 1 W @ 12V<sup>2, 3</sup> |
+^  ^  |
+|  |  |
+^Mechanical parameters |  |
+|Dimensions  |  53.6 x 89.7 x 62.2 mm |
+|Mounting  |  DIN rail |
+|Screw terminals  |  0.5 mm² - 1.5 mm² cable cores |
+|Degree of protection  |  IP20 |
+|Operating temperature  |  -25 .. +60 °C |
+|LED diodes  |  Status, GSM network |
+<sup>1 ... Interface connectors are mutually exclusive. The HBUS interface is intended to be used with the SM2-MU unit module. With the RJ12 connector the SM2-GSM module can be used as an individual GSM/GPRS modem with automatic power management by the DTR signal. </sup> \\ \\
+<sup> 2 ... There is no need for additional power supply if module is connected with the HBUS to the SM2-MU. In this case power supply for the SM2-MU should be calculated to provide sufficient power for all modules on the HBUS. </sup> \\ \\
+<sup> 3 ... During transmission there can be consumption peak bursts up to 6.4 W. </sup> \\
+\\ \\
+{{  .:gsm_vykres.png?nolink&  }} \\
-\\