Rozdíly

Zde můžete vidět rozdíly mezi vybranou verzí a aktuální verzí dané stránky.

--- en:sim:manual:rozsirujici_moduly:sm2_gsm [2016/10/19 14:38] – ondra
+++ en:sim:manual:rozsirujici_moduly:sm2_gsm [2018/06/25 13:53] (aktuální) – ondra
@@ Řádek 20: / Řádek 20: @@
 Open menu “System set up/ E-mail and SMS" in your browser. Tick GSM modem option box and enter phone numbers. Modem is activated in a few seconds and when it has been finished, you can send a trial SMS by clicking on button "Test SMS"..\\
 \\
-{{  .:gsm-web.png?nolink&  }}\\
+You can find [[.:..:menu_nastaveni:gsm_gprs|here]] how to configurate SM2-GSM. \\
-\\
+==== Specification ====
-In the box bellow you tick the event that you want to be informed of by SMS (e.g. sensor values exceeding permitted range).\\
-\\
-{{  .:gsm-sms.png?nolink&  }}
-\\
-\\
-\\
-{{  .:gsm_vykres.png?nolink&  }} \\
-\\
 ^RF parameters ^  |
 |Quad-band  |  850/900/1800/1900MHz |
@@ Řádek 57: / Řádek 49: @@
 |Mounting  |  DIN rail |
 |Screw terminals  |  0.5 mm² - 1.5 mm² cable cores |
+|Degree of protection  |  IP20 |
 |Operating temperature  |  -25 .. +60 °C |
 |LED diodes  |  Status, GSM network |
@@ Řádek 62: / Řádek 55: @@
 <sup> 2 ... There is no need for additional power supply if module is connected with the HBUS to the SM2-MU. In this case power supply for the SM2-MU should be calculated to provide sufficient power for all modules on the HBUS. </sup> \\ \\
 <sup> 3 ... During transmission there can be consumption peak bursts up to 6.4 W. </sup> \\
+\\ \\
+{{  .:gsm_vykres.png?nolink&  }} \\