Rozdíly

Zde můžete vidět rozdíly mezi vybranou verzí a aktuální verzí dané stránky.

--- en:sim:manual:menu_nastaveni:sit_a_cas [2014/08/26 13:27] – ondra
+++ en:sim:manual:menu_nastaveni:sit_a_cas [2018/06/01 14:18] (aktuální) – ondra
@@ Řádek 1: / Řádek 1: @@
 ===== Network and Time =====
 ----
+This submenu enables setting the network and time.\\
-This submenu enables setting the network, time and communication with subordinate portal.\\
 \\
-{{  .:sit_a_cas.png?nolink&  }}
+{{  .:sit_a_cas.png?direct  }}
+==== Network Setup ====
+**IP Address** \\
-==== Network setting ====
-**IP address** \\
 Enter the IP address out of the range of network that Solar Monitor uses.\\
 \\
-**Network mask** \\
+**Network Mask** \\
 Enter the network mask corresponding to the Solar Monitor's network.\\
 \\
-**Default gateway** \\
+**Default Gateway** \\
 Enter the local net address of a device that serves as default gateway to other nets. In local nets it is mostly ADSL modem or some kind of a router (e.g. WiFi router). Without the default gateway the unit won't have the internet access (functions Internet Time and Sending to the Portal won't work).\\
 \\
@@ Řádek 32: / Řádek 24: @@
-If your unit "disappears" in the network after you have switched on DHCP client, you can find it with ETool utility, which can be downloaded here
+If your unit "disappears" in the network after you have switched on DHCP client, you can find it with ETool utility, which can be downloaded [[https://www.solarmonitor.cz/support/download/utilities|here]].
+==== Internet Time ====
-==== Sending data to the portal ====
-**Sending permitted** \\
-You can permit this option once you have access to the portal. The unit will start sending data to the portal in preset interval.\\
-\\
-**Portal address** \\
-Enter the IP address or portal' s name that Solar Monitor unit should connect to (e.g. portal.solarmonitor.cz).\\
-\\
-**Service path** \\
-Enter exact location of SOAP service, that accepts data at the portal. Provider or portal administrator will provide this info.\\
-\\
-**Remote port** \\
-Enter the port that communicates with SOAP service at the portal.\\
-\\
-**Sending period** \\
-Set the time period of sending data to the portal.
-==== Portal communication test ====
-When you press this button, a trial message is sent to the portal and you can check the status of delivery. Inverters are not included in testing packet.
-==== Internet time ====
@@ Řádek 66: / Řádek 31: @@
 Enter time server address on the internet. Default: time.nist.gov.\\
 \\
-**Time zone** \\
+**Time Zone** \\
 Select your time zone.
-==== Date and time ====
+==== Date and Time ====
-**Current date** \\
+**Current Date** \\
 Set/check the right date. This item is updated automatically from the SNTP server on the internet.\\
 \\
-**Current time** \\
+**Current Time** \\
 Set/check the right time. This item is updated automatically from the SNTP server on the internet. Button "Update now" synchronizes the time with the server.