Rozdíly

Zde můžete vidět rozdíly mezi vybranou verzí a aktuální verzí dané stránky.

--- en:sim:manual:menu_nastaveni:sit_a_cas [2014/09/11 13:44] – ondra
+++ en:sim:manual:menu_nastaveni:sit_a_cas [2018/06/01 14:18] (aktuální) – ondra
@@ Řádek 1: / Řádek 1: @@
 ===== Network and Time =====
 ----
+This submenu enables setting the network and time.\\
-This submenu enables setting the network, time and communication with subordinate portal.\\
 \\
-{{  .:sit_a_cas.png?nolink&  }}
+{{  .:sit_a_cas.png?direct  }}
 ==== Network Setup ====
 **IP Address** \\
 Enter the IP address out of the range of network that Solar Monitor uses.\\
@@ Řádek 32: / Řádek 24: @@
-If your unit "disappears" in the network after you have switched on DHCP client, you can find it with ETool utility, which can be downloaded here
+If your unit "disappears" in the network after you have switched on DHCP client, you can find it with ETool utility, which can be downloaded [[https://www.solarmonitor.cz/support/download/utilities|here]].
-==== Sending Data to the Portal ====
-**Sending Permitted** \\
-You can permit this option once you have access to the portal. The unit will start sending data to the portal in preset interval.\\
-\\
-**Portal Address** \\
-Enter the IP address or portal' s name that Solar Monitor unit should connect to (e.g. portal.solarmonitor.cz).\\
-\\
-**Service Path** \\
-Enter exact location of SOAP service, that accepts data at the portal. Provider or portal administrator will provide this info.\\
-\\
-**Remote Port** \\
-Enter the port that communicates with SOAP service at the portal.\\
-\\
-**Sending Period** \\
-Set the time period of sending data to the portal.
-==== Portal Communication Test ====
-When you press this button, a trial message is sent to the portal and you can check the status of delivery. Inverters are not included in testing packet.
 ==== Internet Time ====