This is an old revision of the document!
If there are no sensors connected to your SM2-MU device, go to Next >>
Connect the sensors to the SM2-MU according to the following pictures:
To be connected with 10 meters cable with pressed-in connector. Connect the cable to SM2-MU terminals and the pressed-in connector to the irradiation sensor.
In case you use grey PUR cable with M8F connector, follow these instructions:
1. First connect separate lines of PUR cable to the pins of M8F connector.
2. Connect the PUR cable to SM2-MU terminals and the M8F connector to the irradiation sensor.
Connect the pressed-in connector of PV panel sensor cable to the irradiation sensor.