no way to compare when less than two revisions

Rozdíly

Zde můžete vidět rozdíly mezi vybranou verzí a aktuální verzí dané stránky.

@@ Řádek 1: / Řádek 1: @@
+===== Finding the Unit in the Net, Web Interface Display =====
+----
+\\
+SM2-MU unit allows DHCP client regime in the default setting. The IP address is allocated automatically by the DHCP server in local net (if available).
+In case you don't have DHCP server in your net, connect the unit to the power supply and when green LED diode Status is on, press button Setup 3 times.\\
+After a few seconds you can log in at the IP address [[http://192.168.1.99|192.168.1.99]].\\
+\\
+When you enter this IP address in your web browser, you display the unit's web interface.\\
+\\
+Applikation **ETool ** makes finding SM2-MU in the net easier.\\
+\\
+This application identifies your unit without the IP address. You can download the application [[http://www.solarmonitor.cz/podpora/ke-stazeni/utililty|here]] and install in your PC.\\
+\\
+{{  :en:sim:manual:prvni_spusteni:etool.png?nolink&  }}\\
+\\
+Button {{:en:sim:manual:prvni_spusteni:etool_tlacitko.png?nolink&}} next to box “IP address“ opens particular unit's sites. See chapter [[:en:sim:manual:prvni_spusteni:zobrazeni_weboveho_rozhrani|Web interface]].\\
+Or you can click on button Device image (left down) in order to open the unit's sites.\\
+\\
+<WRAP right> [[:en:sim:manual:rychly_navod:konfigurace:nazev_jednotky|Next >>]] </WRAP>