Rozdíly

Zde můžete vidět rozdíly mezi vybranou verzí a aktuální verzí dané stránky.

--- en:sim:manual:jak_na_instalaci:digitalni_vstupy_a_vystupy [2014/08/15 15:49] – jitka
+++ en:sim:manual:jak_na_instalaci:digitalni_vstupy_a_vystupy [2018/07/10 14:41] (aktuální) – ondra
@@ Řádek 8: / Řádek 8: @@
-Solar Monitor has 3 digital inputs DI. It is easy to connect movement sensor, surge, optical barrier, door sensor and various other devices that use contact inputs to indicate its status. Input DI3 can be used for measuring energy at the [[:en:sim:manual:jak_na_instalaci:elmer|elektro meter]] on condition that it has pulse output SO.
+Solar Monitor has 3 digital inputs DI. It is easy to connect movement sensor, surge, optical barrier, door sensor and various other devices that use contact inputs to indicate its status. Any of the inputs DI1, DI2, DI3 can be used for measuring energy at the [[.:elmer|electrometer]] on condition that it has pulse output SO.
@@ Řádek 14: / Řádek 14: @@
-Conversion coefficient differs according to the electrometer's type and in most cases it doesn't correspond with the number of LED diode pulses. It is very important to select the right coefficient for SO output. Most electrometers have 250/kwh number of pulses at the LED diode and 1000/kwh at the output SO. You will find out how to enter the right coefficient into Solar Monitor unit in chapter [[:sim:manual:menu_nastaveni:stridace_a_mereni|Inverters and measuring]].
+Conversion coefficient differs according to the electrometer's type and in most cases it doesn't correspond with the number of LED diode pulses. It is very important to select the right coefficient for SO output. Most electrometers have 250/kwh number of pulses at the LED diode and 1000/kwh at the output SO. You will find out how to enter the right coefficient into Solar Monitor unit in chapter [[..:menu_nastaveni:vstupy_a_vystupy|Inputs & Counters]].
@@ Řádek 22: / Řádek 22: @@
 It is possible to connect more devices to a single contact loop and monitor the entire circuit as one name. But if one device changes contact status, you won't be able to identify which device has caused the alarm.\\
 \\
-{{  :sim:manual:jak_na_instalaci:digitalni_vstupy.png?nolink&400  }}
+{{  .:digitalni_vstupy.png?nolink&400  }}
@@ Řádek 30: / Řádek 30: @@
 You can choose one relay which is in SM2-MU. The relay can switch on the ventilation according to current ambiente temperature or it can control the boiler (must be connected via contactor) according to the current energy production etc.\\
 \\
-{{  :sim:manual:jak_na_instalaci:digitalni_vystupy.png?nolink&400  }}
+{{  .:digitalni_vystupy.png?nolink&400  }}