Rozdíly

Zde můžete vidět rozdíly mezi vybranou verzí a aktuální verzí dané stránky.

--- en:sim:manual:menu_nastaveni:gsm_gprs [2018/06/01 15:13] – created ondra
+++ en:sim:manual:menu_nastaveni:gsm_gprs [2019/12/06 08:40] (aktuální) – ondra
@@ Řádek 1: / Řádek 1: @@
-==== SMS Set up ====
+===== GSM / GPRS =====
+It is set in Solar Monitor in the Settings / GSM/GPRS menu. This mode is disabled in default setting!\\
+{{  :en:sim:manual:menu_nastaveni:gsm_nastaveni.png?direct&  }}\\
+\\
+If there is SM2-GSM module connected to the SM2-MU, select appropriate mode in options.
-**Permit GSM Modem** \\
-If there is a GSM modem connected to the Solar Monitor unit, allow this option.\\
+==== SMS Remote ====
+In case of having more modules SM2-MU connected in one network and one of them is directly connected to SM-GSM module, all modules SM2-MU are able to send text message reports.\\
+Fill in the box **Remote Gateway ** with the IP address of SM2-MU connected to module SM2-GSM.\\
+Enter recipient's phone number (maximum two recipients) in the following format: +420xxxxxxxxx. You can test the setting and functionality by using a "Send Test SMS" option.
+{{  :en:sim:manual:menu_nastaveni:sms_vzdalene.png?direct&  }}
+==== SMS (only) ====
+Sending text message report from SM2-MU which is directly connected to SM2-GSM via HBUS.\\
 \\
-**SMS Center Number** \\
+If SIM card has PIN, enter the number into box **PIN.** \\
-If your modem is connected, you can see the SMS center number. If you can't see it, you have to set it up at the SIM card ( using another device, e.g. mobile phone).\\
+If the module has been connected, the **SMS Center Number ** appears. In case it doesn't appear, you need to set it up correctly on SIM card (in a different device, e.g. a mobile phone).\\
-\\
+**Modem State**- shows the status of communication with the modem. If the modem is all right, you can see "ready" in this box.\\
-**Modem Status** \\
+<font 12.8px/arial;;#000000;;#ffffff>Enter recipient's phone number (maximum two recipients) in the following format: +420xxxxxxxxx. You can test the setting and functionality by using a "Send Test SMS" option.</font>\\
-Shows history of communication with the modem. Modem is OK if there is " ready" in the box. . <WRAP info> At the SIM card in GSM modem you have to cancel security PIN code! </WRAP>
+{{  :en:sim:manual:menu_nastaveni:sms_pouze.png?direct&  }}
+==== Data only ====
-==== SMS Recipients ====
+This mode enables communication with the Portal and reporting via email using a data tarif.\\
+<WRAP info> It is useful in locations without permanent internet connection. In that case, use the ethernet connector at SM2-MU only for configuration on PC. When UTP cable is disconnected, the module starts to communicate via GSM. </WRAP> <WRAP important> SIM card must have mobile data tarif. </WRAP> If SIM card has PIN, enter the number into **PIN**.\\
+Enter correct **APN Address ** following your mobile phone operator instructions and **Dialled Number**.\\
+{{  :en:sim:manual:menu_nastaveni:data_pouze.png?direct&  }}
-**1. recipient, 2. recipient** \\
-Enter phone numbers of SMS recipients who will receive text messages in this form: +420xxxxxxxxx. If you wish to check that modem and set up works, press the "Send test SMS" button.