Uživatelské nástroje

Nástroje pro tento web

Historie:
en:sim:rm:web_zarizeni:vstupy_a_mereni

Rozdíly

Zde můžete vidět rozdíly mezi vybranou verzí a aktuální verzí dané stránky.

Odkaz na výstup diff

Obě strany předchozí revizePředchozí verze
Následující verze		Předchozí verze
en:sim:rm:web_zarizeni:vstupy_a_mereni [2014/08/28 14:42] – jitkaen:sim:rm:web_zarizeni:vstupy_a_mereni [2014/09/11 10:16] (aktuální) – ondra
Řádek 1: Řádek 1:
-===== Inputs and Measurement =====+===== Inputs & Meters =====
  
  
Řádek 5: Řádek 5:
  
  
-In SM2-RM go to menu System Setup/Inputs and Measurement.\\  +In SM2-RM go to menu System Setup/Inputs & Meters.\\ 
-\\  +
-{{  :en:sim:rm:web_zarizeni:vstupy_a_mereni_3citace.png?nolink&  }}\\  +
-\\ +
 \\  \\ 
 +{{  .:vstupy_a_mereni_3citace.png?nolink&  }}\\ 
 ==== Input 1, Input 2, Input 3 ==== ==== Input 1, Input 2, Input 3 ====
  
Řádek 16: Řádek 14:
 Assign each input its function.\\  Assign each input its function.\\ 
 \\  \\ 
-If you assign input **Reading ** function, it will read pulses.\\  +If you assign input **Counter ** function, it will count pulses.\\  
-<WRAP info> You can erase pulse score by changing energy correction, by changing input function (Reader, Inactive) or by pressing a reset button for 4 sec. The reset button is at the top of the box bellow Status diode. You can use e.g. a paper clip to press the button.  </WRAP> If you choose **Input** function, there will be value 1 or 2 (connected, disconnected) in "Overview".\\ +<WRAP info> You can erase pulse score by changing energy correction, by changing input function (Reader, Inactive) or by pressing a reset button for 4 sec. The reset button is at the top of the box bellow Status diode. You can use e.g. a paper clip to press the button. </WRAP> If you choose **Input** function, there will be value 1 or 2 (connected, disconnected) in "Overview".\\ 
 \\  \\ 
 In case there is no device connected, choose **Inactive**.\\  In case there is no device connected, choose **Inactive**.\\ 
 \\  \\ 
 **Name** \\  **Name** \\ 
-You can assign the input any name (e.g. electrometer, gas meter, door sensor...).\\ +You can assign the input any name (e.g. electrometer, gas meter, door sensor…).\\ 
 \\  \\ 
 **Meter Type** \\  **Meter Type** \\ 
Řádek 30: Řádek 28:
 \\  \\ 
 **Number of Pulses per 1 (kWh, m³)** \\  **Number of Pulses per 1 (kWh, m³)** \\ 
-Fill in the number of pulses per a unit (kWh, m³), that your meter generates at the SO output. This information is stated at the meter's label or in its documentation. If  wrong number of pulses is entered, SM2-RM will show wrong production or consumption values.\\ +Fill in the number of pulses per a unit (kWh, m³), that your meter generates at the SO output. This information is stated at the meter's label or in its documentation. If wrong number of pulses is entered, SM2-RM will show wrong production or consumption values.\\ 
 \\  \\ 
 It is essential that electro meter's pulse output is configured for delivery.\\  It is essential that electro meter's pulse output is configured for delivery.\\ 
Řádek 36: Řádek 34:
 <WRAP info> Default setting is reading pulses from the electro meter, value 1000 pulses per 1 kWh. If your electro meter shows a different number, change the setting. </WRAP> <WRAP half column>\\  <WRAP info> Default setting is reading pulses from the electro meter, value 1000 pulses per 1 kWh. If your electro meter shows a different number, change the setting. </WRAP> <WRAP half column>\\ 
 The number of impulses per 1 kWh is usually between 250-1000 imp/1kWh. In case there are 2 possible numbers of impulses at your electro meter, the lower number is usually the right one for the SO output.\\  The number of impulses per 1 kWh is usually between 250-1000 imp/1kWh. In case there are 2 possible numbers of impulses at your electro meter, the lower number is usually the right one for the SO output.\\ 
-The higher number tells you how often a LED diode at your electro meter switches on.  </WRAP> <WRAP half column> {{  :en:sim:rm:rychly_navod:jak_na_to:obrazek_elmeru.png?100  }}</WRAP>\\ +The higher number tells you how often a LED diode at your electro meter switches on. </WRAP> <WRAP half column> {{  ..:rychly_navod:jak_na_to:obrazek_elmeru.png?100  }}</WRAP>\\ 
 **In case you need to setup number of pulses other than 1000 per 1 kWh než 1000, it is essential to differentiate between direct and indirect measurement:**  **In case you need to setup number of pulses other than 1000 per 1 kWh než 1000, it is essential to differentiate between direct and indirect measurement:** 
 ==== 1. Direct Measuring ==== ==== 1. Direct Measuring ====
  
  
-In the electro meter's label or documentation find out how many pulses per 1 kWh your electro meter generates at the SO output. Fill in this value into relevant box in SM2-RM menu.\\ +In the electro meter's label or documentation find out how many pulses per 1 kWh your electro meter generates at the SO output. Fill in this value into relevant box in SM2-RM menu. 
 + 
 ==== 2. Indirect Measuring ==== ==== 2. Indirect Measuring ====
  
Řádek 52: Řádek 52:
 \\  \\ 
 </WRAP> <WRAP half column>\\  </WRAP> <WRAP half column>\\ 
-{{  :en:sim:rm:rychly_navod:jak_na_to:pocet_pulzu_pomer.png?200  }}\\ +{{  ..:rychly_navod:jak_na_to:pocet_pulzu_pomer.png?200  }}\\ 
 \\  \\ 
 \\  \\ 
Řádek 59: Řádek 59:
  
  
-**Meter's Correction ** \\ +**Meter Correction ** \\ 
 This box is used for initial setting up SM2-RM and pulse meter. Fill in current value of kWh or m³ that your meter displays.\\  This box is used for initial setting up SM2-RM and pulse meter. Fill in current value of kWh or m³ that your meter displays.\\ 
 \\  \\ 
Řádek 67: Řádek 67:
 \\  \\ 
 //Example of another input function:// \\  //Example of another input function:// \\ 
-{{  :en:sim:rm:web_zarizeni:vstupy_a_mereni_vice_moznosti.png?nolink&  }}+{{  .:vstupy_a_mereni_vice_moznosti.png?nolink&  }}
  
en/sim/rm/web_zarizeni/vstupy_a_mereni.1409229732.txt.gz · Poslední úprava: 2014/08/28 14:42 autor: jitka