Rozdíly

Zde můžete vidět rozdíly mezi vybranou verzí a aktuální verzí dané stránky.

--- en:sim:rm:web_zarizeni:vstupy_a_mereni [2014/09/02 08:22] – jitka
+++ en:sim:rm:web_zarizeni:vstupy_a_mereni [2014/09/11 10:16] (aktuální) – ondra
@@ Řádek 1: / Řádek 1: @@
-===== Inputs and Measurement =====
+===== Inputs & Meters =====
@@ Řádek 5: / Řádek 5: @@
-In SM2-RM go to menu System Setup/Inputs and Measurement.\\
+In SM2-RM go to menu System Setup/Inputs & Meters.\\
 \\
-{{  :en:sim:rm:web_zarizeni:vstupy_a_mereni_3citace.png?nolink&  }}\\
+{{  .:vstupy_a_mereni_3citace.png?nolink&  }}\\
 ==== Input 1, Input 2, Input 3 ====
@@ Řádek 34: / Řádek 34: @@
 <WRAP info> Default setting is reading pulses from the electro meter, value 1000 pulses per 1 kWh. If your electro meter shows a different number, change the setting. </WRAP> <WRAP half column>\\
 The number of impulses per 1 kWh is usually between 250-1000 imp/1kWh. In case there are 2 possible numbers of impulses at your electro meter, the lower number is usually the right one for the SO output.\\
-The higher number tells you how often a LED diode at your electro meter switches on. </WRAP> <WRAP half column> {{  :en:sim:rm:rychly_navod:jak_na_to:obrazek_elmeru.png?100  }}</WRAP>\\
+The higher number tells you how often a LED diode at your electro meter switches on. </WRAP> <WRAP half column> {{  ..:rychly_navod:jak_na_to:obrazek_elmeru.png?100  }}</WRAP>\\
 **In case you need to setup number of pulses other than 1000 per 1 kWh než 1000, it is essential to differentiate between direct and indirect measurement:**
 ==== 1. Direct Measuring ====
@@ Řádek 52: / Řádek 52: @@
 \\
 </WRAP> <WRAP half column>\\
-{{  :en:sim:rm:rychly_navod:jak_na_to:pocet_pulzu_pomer.png?200  }}\\
+{{  ..:rychly_navod:jak_na_to:pocet_pulzu_pomer.png?200  }}\\
 \\
 \\
@@ Řádek 67: / Řádek 67: @@
 \\
 //Example of another input function:// \\
-{{  :en:sim:rm:web_zarizeni:vstupy_a_mereni_vice_moznosti.png?nolink&  }}
+{{  .:vstupy_a_mereni_vice_moznosti.png?nolink&  }}