Differences

This shows you the differences between two versions of the page.

--- en:sim:manual:menu_nastaveni:gsm_gprs [2018/07/09 09:34]
jitka
+++ en:sim:manual:menu_nastaveni:gsm_gprs [2019/12/06 08:40] (current)
ondra
@@ Line 1: / Line 1: @@
 ===== GSM / GPRS =====
+It is set in Solar Monitor in the Settings / GSM/GPRS menu. This mode is disabled in default setting!\\
-Ve výchozím nastavení je režim zakázán.This mode is disabled in default setting!\\
 {{  :en:sim:manual:menu_nastaveni:gsm_nastaveni.png?direct&  }}\\
 \\
-Pokud máte k SM2-MU připojený modul SM2-GSM, zvolte dle potřeby jeden z nabízených režimů. If there is SM2\\
+If there is SM2-GSM module connected to the SM2-MU, select appropriate mode in options.
--GSM module connected to the SM2-MU, select appropriate mode in options.
@@ Line 13: / Line 11: @@
 In case of having more modules SM2-MU connected in one network and one of them is directly connected to SM-GSM module, all modules SM2-MU are able to send text message reports.\\
-Fill in the box **Remote Gateway**with the IP address of SM2-MU connected to module SM2-GSM.\\
+Fill in the box **Remote Gateway ** with the IP address of SM2-MU connected to module SM2-GSM.\\
-Enter recipient's phone number (maximum two recipients) in the following format: +420xxxxxxxxx. You can test the setting and functionality by using a "Send Test SMS"  option.
+Enter recipient's phone number (maximum two recipients) in the following format: +420xxxxxxxxx. You can test the setting and functionality by using a "Send Test SMS" option.
@@ Line 26: / Line 24: @@
 \\
 If SIM card has PIN, enter the number into box **PIN.** \\
-If the module has been connected, the  **SMS Center Number ** appears.  In case it doesn't appear, you need to set it up correctly on SIM card (in a different device, e.g. a mobile phone).\\
+If the module has been connected, the **SMS Center Number ** appears. In case it doesn't appear, you need to set it up correctly on SIM card (in a different device, e.g. a mobile phone).\\
 **Modem State**- shows the status of communication with the modem. If the modem is all right, you can see "ready" in this box.\\
-<font 12.8px/arial;;#000000;;#ffffff>Enter recipient's phone number (maximum two recipients) in the following format: +420xxxxxxxxx. You can test the setting and functionality by using a "Send Test SMS"  option.</font> \\
+<font 12.8px/arial;;#000000;;#ffffff>Enter recipient's phone number (maximum two recipients) in the following format: +420xxxxxxxxx. You can test the setting and functionality by using a "Send Test SMS" option.</font>\\
 {{  :en:sim:manual:menu_nastaveni:sms_pouze.png?direct&  }}
@@ Line 35: / Line 33: @@
-Tento režim slouží pro komunikaci s Portálem a k odesílání hlášení emailem prostřednitvím datového tarifu.\\
+This mode enables communication with the Portal and reporting via email using a data tarif.\\
-<WRAP info> Uplatníte ho tam, kde nemáte k dispozici pevné internetové připojení. V takovém případě slouží ethernetový konektor na SM2-MU pouze pro konfiguraci z PC a po vytažení UTP kabelu z konektoru začne jednotka komunikovat prostřednictvím GSM. </WRAP> <WRAP important> Vložená SIM karta musí být vybavena mobilním datovým tarifem. </WRAP> Pokud je vložená SIM karta zabezpečena PINem, vyplňte ho do pole **PIN**.\\
+<WRAP info> It is useful in locations without permanent internet connection. In that case, use the ethernet connector at SM2-MU only for configuration on PC. When UTP cable is disconnected, the module starts to communicate via GSM. </WRAP> <WRAP important> SIM card must have mobile data tarif. </WRAP> If SIM card has PIN, enter the number into **PIN**.\\
-Zadejte správnou **Adresu APN** dle Vašeho mobilního operátora a **Vytáčené číslo**.\\
+Enter correct **APN Address ** following your mobile phone operator instructions and **Dialled Number**.\\
 {{  :en:sim:manual:menu_nastaveni:data_pouze.png?direct&  }}

User Tools

Site Tools

Differences

Page Tools