Toto je starší verze dokumentu!
Inputs & Counters
Submenu Inputs & Counters enables setting up the inputs
Table default setting:
Input set up
Select input function
Solar Monitor has 3 inputs available. Each works as:
<font 9pt/Arial, sans-serif;;#000000;;inherit font-family: Arial, sans-serif; font-weight: bold;>a) Input = binary input</font>
The table shows current input status. Set up required values.
If you want to receive input set-up notification, select the option of email or SMS when you change the input values (on/off).
b) Counter = counts pulses from meter (electrometer, gasmeter, watermeter)
When you select the Counter option , there is table Counter set-up above the table Inputs.
For more info on pulse number set-up see chapter ELectrometer.
In case of setting up wrong values, Solar Monitor cannot show correct production data.
If the counter doesn't count pulses, check cables and polarity of electrometer connection.
c) Input and Counter = counting from device detected on RS485, RS232, Ethernet + can be used as binary input too.
<font 12.8px/arial;;#000000;;#ffffff>When you select the Input and Counter option, there is table Counter set-up above the table Inputs.</font>
If you want to use this input as binary input too, set up required value.