en:sim:manual:jak_na_instalaci:fronius_layout
Toto je starší verze dokumentu!
Connection Diagram
In a similar way, you can connect SM2 to connector OUT. Then terminator is connected to IN.
Connector Pinout
SM2 - Fronius IN
| PIN | Name |
|---|---|
| 1 | +12V |
| 2 | GND |
| 3 | Tx+ |
| 4 | Rx+ |
| 5 | Rx- |
| 6 | Tx- |
| 7 | GND |
| 8 | +12V |
SM2 - Fronius OUT
| PIN | Name |
|---|---|
| 1 | +12V |
| 2 | GND |
| 3 | Rx+ |
| 4 | Tx+ |
| 5 | Tx- |
| 6 | Rx- |
| 7 | GND |
| 8 | +12V |
Configuration Notes
en/sim/manual/jak_na_instalaci/fronius_layout.1411114548.txt.gz · Poslední úprava: 2014/09/19 10:15 autor: ondra